Aortic stent grafts

Endurant™ II-IIs stent graft system

<p>Endurant stent graft system is designed to treat abdominal aortic aneurysms (AAA) using a minimally invasive endovascular aneurysm repair (EVAR).</p>

Ordering information
Contact a representative

Features

The Endurant system was designed with key features2 to address sac regression and ensure durability.3–5​

Accurate placement and controlled deployment3

  • Intuitive graft deployment system7 offers controlled delivery at the intended target zone with 99.3% delivery and deployment success (IDE).†,3​

  • Tip capture deployment mechanism — even after deployment of three stent rings — provides gradual, controlled, and accurate deployment at the intended sealing zone.3

Deployment of the Endurant™ II stent graft

Deployment of the Endurant™ IIs stent graft

The Endurant™ stent graft features a continuous seal.

Continuous Seal4

  1. Separation of seal from fixation — with suprarenal fixation, which enables seal to occur independently4​
  2. M-shaped proximal stents, unique to the Endurant stent graft, maximize wall apposition and circumferential conformability4 to minimize in-folding resulting in low type Ia endoleak rates6​
  3. Electropolished nitinol stents maximize circumferential conformability with dynamic continuous seal4
The Endurant™ stent graft offers durability in aortic procedures.

Resistance against type II endoleak5​

  • Woven, high density, multifilament polyester material8 that promotes sac thrombosis5
  • Addresses sac regression2–5

Decade of durability data6​

Endurant™ AAA stent graft system: The first and only EVAR system with a decade of global registry outcomes.6​

Explore Endurant™ clinical outcomes

The Endurant™ family of products

Three configurations

  • Bifurcated main body stent grafts:
    • Endurant™ II bifurcated configuration — an aortoiliac stent graft that is available in three lengths.
    • Endurant™ IIs bifurcated configuration — an aortic configuration available in a single, shorter length. 
  • Aorto-uni-iliac (AUI) main body stent graft:
    • The AUI device is indicated for the endovascular treatment of infrarenal abdominal aortic or aortoiliac aneurysms only in patients whose anatomy does not allow the use of a bifurcated device. The proximal end of the aorto-uni-iliac (AUI) configuration is deployed into the proximal neck and upper section of the aneurysm. The proximal section of the AUI configuration is composed of nitinol stents sewn to a fabric graft.
Endurant™ II stent graft is designed to treat abdominal aortic aneurysms (AAA) in both challenging and straightforward patient anatomy.

Endurant™ II stent graft   

Endurant™ IIs stent graft is a three-piece system that is designed to treat abdominal aortic aneurysms (AAA) in both challenging and straightforward anatomy.

Endurant™ IIs stent graft   

The Endurant™ II stent graft system aorto-uni-iliac (AUI) stent graft is indicated for the endovascular treatment of infrarenal abdominal aortic or aortoiliac aneurysms in patients whose anatomy does not allow the use of a bifurcated stent graft.

Endurant™ II AUI stent graft   

Ordering information

Endurant™ II bifurcations - US Only - delete this for non-US sites

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETBF2313C124E 23 13 C 124 E 18
ETBF2313C145E 23 13 C 145 E 18
ETBF2313C166E 23 13 C 166 E 18
ETBF2316C124E 23 16 C 124 E 18
ETBF2316C145E 23 16 C 145 E 18
ETBF2316C166E 23 16 C 166 E 18
ETBF2513C124E 25 13 C 124 E 18
ETBF2513C145E 25 13 C 145 E 18
ETBF2513C166E 25 13 C 166 E 18
ETBF2516C124E 25 16 C 124 E 18
ETBF2516C145E 25 16 C 145 E 18
ETBF2516C166E 25 16 C 166 E 18
ETBF2813C124E 28 13 C 124 E 18
ETBF2813C145E 28 13 C 145 E 18
ETBF2813C166E 28 13 C 166 E 18
ETBF2816C124E 28 16 C 124 E 18
ETBF2816C145E 28 16 C 145 E 18
ETBF2816C166E 28 16 C 166 E 18
ETBF2820C124E 28 20 C 124 E 18
ETBF2820C145E 28 20 C 145 E 18
ETBF2820C166E 28 20 C 166 E 18
ETBF3216C124E 32 16 C 124 E 20
ETBF3216C145E 32 16 C 145 E 20
ETBF3216C166E 32 16 C 166 E 20
ETBF3220C124E 32 20 C 124 E 20
ETBF3220C145E 32 20 C 145 E 20
ETBF3220C166E 32 20 C 166 E 20
ETBF3616C145E 36 16 C 145 E 20
ETBF3616C166E 36 16 C 166 E 20
ETBF3620C145E 36 20 C 145 E 20
ETBF3620C166E 36 20 C 166 E 20

Endurant™ IIs bifurcations

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ESBF2314C103E 23 14 C 103 E 18
ESBF2514C103E 25 14 C 103 E 18
ESBF2814C103E 28 14 C 103 E 18
ESBF3214C103E 32 14 C 103 E 20
ESBF3614C103E 36 14 C 103 E 20

Limbs‡

Item number Distal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr) Total contralateral covered length with EII/EIIs bifurcated§ Total ipsilateral covered length with EIIs bifurcated◊
ETLW1610C82E 16 10 C 82 E 14 132 152
ETLW1610C93E 16 10 C 93 E 14 143 163
ETLW1610C124E 16 10 C 124 E 14 174 174–194
ETLW1610C146E 16 10 C 146 E 16 196 196–216
ETLW1610C156E 16 10 C 156 E 16 206 206–226
ETLW1610C199E 16 10 C 199 E 16 249 249–269
ETLW1613C82E 16 13 C 82 E 14 132 152
ETLW1613C93E 16 13 C 93 E 14 143 163
ETLW1613C124E 16 13 C 124 E 14 174 174–194
ETLW1613C146E 16 13 C 146 E 16 196 196–216
ETLW1613C156E 16 13 C 156 E 16 206 206–226
ETLW1613C199E 16 13 C 199 E 16 249 249–269
ETLW1616C82E 16 16 C 82 E 14 132 132–152
ETLW1616C93E 16 16 C 93 E 14 143 143–163
ETLW1616C124E 16 16 C 124 E 14 174 174–194
ETLW1616C146E 16 16 C 146 E 16 196 196–216
ETLW1616C156E 16 16 C 156 E 16 206 206–226
ETLW1616C199E 16 16 C 199 E 16 249 249–269
ETLW1620C82E 16 20 C 82 E 16 132 152
ETLW1620C93E 16 20 C 93 E 16 143 163
ETLW1620C124E 16 20 C 124 E 16 174 174–194
ETLW1620C146E 16 20 C 146 E 16 196 196–216
ETLW1620C156E 16 20 C 156 E 16 206 206–226
ETLW1620C199E 16 20 C 199 E 16 249 249–269
ETLW1624C82E 16 24 C 82 E 16 132 152
ETLW1624C93E 16 24 C 93 E 16 143 163
ETLW1624C124E 16 24 C 124 E 16 174 174–194
ETLW1624C146E 16 24 C 146 E 16 196 196–216
ETLW1624C156E 16 24 C 156 E 16 206 206–226
ETLW1624C199E 16 24 C 199 E 16 249 249–269
ETLW1628C82E 16 28 C 82 E 16 132 152
ETLW1628C93E 16 28 C 93 E 16 143 163
ETLW1628C124E 16 28 C 124 E 16 174 174–194
ETLW1628C146E 16 28 C 146 E 16 196 196–216
ETLW1628C156E 16 28 C 156 E 16 206 206–226
ETLW1628C199E 16 28 C 199 E 16 249 249–269

‡ The limb mates with the AUI stent graft on the ipsilateral side.

§ These calculations assume the minimum 30 mm overlap between the bifurcated stent graft and the contralateral iliac limb per the Endurant™ II stent graft instructions for use.

◊ The 3–5 stent overlap is available only with select limbs. Please refer to the instructions for use for more information.

Aortic extensions

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETCF2323C49E 23 23 C 49 E 18
ETCF2525C49E 25 25 C 49 E 18
ETCF2828C49E 28 28 C 49 E 18
ETCF3232C49E 32 32 C 49 E 20
ETCF3636C49E 36 36 C 49 E 20
ETTF2323C70E 23 23 C 70 E 18
ETTF2525C70E 25 25 C 70 E 18
ETTF2828C70E 28 28 C 70 E 18
ETTF3232C70E 32 32 C 70 E 20
ETTF3636C70E 36 36 C 70 E 20

AUI

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETUF2314C102E 23 14 C 102 E 18
ETUF2514C102E 25 14 C 102 E 18
ETUF2814C102E 28 14 C 102 E 18
ETUF3214C102E 32 14 C 102 E 20
ETUF3614C102E 36 14 C 102 E 20

Iliac extensions

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETEW1010C82E 10 10 C 82 E 14
ETEW1313C82E 13 13 C 82 E 14
ETEW2020C82E 20 20 C 82 E 16
ETEW2424C82E 24 24 C 82 E 16
ETEW2828C82E 28 28 C 82 E 18

Endurant™ II bifurcations - Global - delete this for US site

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETBF2313C124EE 23 13 C 124 EE 18
ETBF2313C145EE 23 13 C 145 EE 18
ETBF2313C166EE 23 13 C 166 EE 18
ETBF2316C124EE 23 16 C 124 EE 18
ETBF2316C145EE 23 16 C 145 EE 18
ETBF2316C166EE 23 16 C 166 EE 18
ETBF2513C124EE 25 13 C 124 EE 18
ETBF2513C145EE 25 13 C 145 EE 18
ETBF2513C166EE 25 13 C 166 EE 18
ETBF2516C124EE 25 16 C 124 EE 18
ETBF2516C145EE 25 16 C 145 EE 18
ETBF2516C166EE 25 16 C 166 EE 18
ETBF2813C124EE 28 13 C 124 EE 18
ETBF2813C145EE 28 13 C 145 EE 18
ETBF2813C166EE 28 13 C 166 EE 18
ETBF2816C124EE 28 16 C 124 EE 18
ETBF2816C145EE 28 16 C 145 EE 18
ETBF2816C166EE 28 16 C 166 EE 18
ETBF2820C124EE 28 20 C 124 EE 18
ETBF2820C145EE 28 20 C 145 EE 18
ETBF2820C166EE 28 20 C 166 EE 18
ETBF3216C124EE 32 16 C 124 EE 20
ETBF3216C145EE 32 16 C 145 EE 20
ETBF3216C166EE 32 16 C 166 EE 20
ETBF3220C124EE 32 20 C 124 EE 20
ETBF3220C145EE 32 20 C 145 EE 20
ETBF3220C166EE 32 20 C 166 EE 20
ETBF3616C145EE 36 16 C 145 EE 20
ETBF3616C166EE 36 16 C 166 EE 20
ETBF3620C145EE 36 20 C 145 EE 20
ETBF3620C166EE 36 20 C 166 EE 20

Endurant™ IIs bifurcations

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ESBF2314C103EE 23 14 C 103 EE 18
ESBF2514C103EE 25 14 C 103 EE 18
ESBF2814C103EE 28 14 C 103 EE 18
ESBF3214C103EE 32 14 C 103 EE 20
ESBF3614C103EE 36 14 C 103 EE 20

Limbs‡

Item number Distal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr) Total contralateral covered length with EII/EIIs bifurcated§ Total ipsilateral covered length with EIIs bifurcated◊
ETLW1610C82EE 16 10 C 82 EE 14 136 155
ETLW1610C93EE 16 10 C 93 EE 14 147 166
ETLW1610C124EE 16 10 C 124 EE 14 178 177–197
ETLW1610C156EE 16 10 C 156 EE 16 210 209–229
ETLW1610C199EE 16 10 C 199 EE 16 253 252–272
ETLW1613C82EE 16 13 C 82 EE 14 136 155
ETLW1613C93EE 16 13 C 93 EE 14 147 166
ETLW1613C124EE 16 13 C 124 EE 14 178 177–197
ETLW1613C156EE 16 13 C 156 EE 16 210 209–229
ETLW1613C199EE 16 13 C 199 EE 16 253 252–272
ETLW1616C82EE 16 16 C 82 EE 14 136 135–155
ETLW1616C93EE 16 16 C 93 EE 14 147 146–166
ETLW1616C124EE 16 16 C 124 EE 14 178 177–197
ETLW1616C156EE 16 16 C 156 EE 16 210 209–229
ETLW1616C199EE 16 16 C 199 EE 16 253 252–272
ETLW1620C82EE 16 20 C 82 EE 16 136 155
ETLW1620C93EE 16 20 C 93 EE 16 147 166
ETLW1620C124EE 16 20 C 124 EE 16 178 177–197
ETLW1620C156EE 16 20 C 156 EE 16 210 209–229
ETLW1620C199EE 16 20 C 199 EE 16 253 252–272
ETLW1624C82EE 16 24 C 82 EE 16 136 155
ETLW1624C93EE 16 24 C 93 EE 16 147 166
ETLW1624C124EE 16 24 C 124 EE 16 178 177–197
ETLW1624C156EE 16 24 C 156 EE 16 210 209–229
ETLW1624C199EE 16 24 C 199 EE 16 253 252–272
ETLW1628C82EE 16 28 C 82 EE 16 136 155
ETLW1628C93EE 16 28 C 93 EE 16 147 166
ETLW1628C124EE 16 28 C 124 EE 16 178 177–197
ETLW1628C156EE 16 28 C 156 EE 16 210 209–229
ETLW1628C199EE 16 28 C 199 EE 16 253 252–272

‡ The limb mates with the AUI stent graft on the ipsilateral side.

§ These calculations assume the minimum 30 mm overlap between the bifurcated stent graft and the contralateral iliac limb per the Endurant™ stent graft system instructions for use.

◊ The 3–5 stent overlap is available only with select limbs. Please refer to the instructions for use for more information.

Aortic extensions

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETCF2323C49EE 23 23 C 49 EE 18
ETCF2525C49EE 25 25 C 49 EE 18
ETCF2828C49EE 28 28 C 49 EE 18
ETCF3232C49EE 32 32 C 49 EE 20
ETCF3636C49EE 36 36 C 49 EE 20

Abdominal tubes

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETTF2323C70EE 23 23 C 70 EE 18
ETTF2525C70EE 25 25 C 70 EE 18
ETTF2828C70EE 28 28 C 70 EE 18
ETTF3232C70EE 32 32 C 70 EE 20
ETTF3636C70EE 36 36 C 70 EE 20

AUI

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETUF2314C102EE 23 14 C 102 EE 18
ETUF2514C102EE 25 14 C 102 EE 18
ETUF2814C102EE 28 14 C 102 EE 18
ETUF3214C102EE 32 14 C 102 EE 20
ETUF3614C102EE 36 14 C 102 EE 20

Iliac extensions

Item number Proximal graft diameter (mm) Distal graft diameter (mm) Distal design Total covered length (mm) Delivery system Catheter outer diameter (Fr)
ETEW1010C82EE 10 10 C 82 EE 14
ETEW1313C82EE 13 13 C 82 EE 14
ETEW2020C82EE 20 20 C 82 EE 16
ETEW2424C82EE 4 24 C 82 EE 16
ETEW2828C82EE 8 28 C 82 EE 18

Resources

Related links

Similar products

† Delivery success = successful vascular access and delivery of the device to the intended anatomical treatment site. Deployment success = successful deployment of the device in the intended site and the successful removal of the delivery system.

  1. Based on internal Endurant™ patient implant tracking at Medtronic. Data current as of September 2023.
  2. Lalys F, et al. J Vasc Surg. 2017;65(6):1830–1838.
  3. Makaroun M, et al. J Vasc Surg. 2011;54:601–608.
  4. Based on internal test report DVR7245 Design Verification Report: Endurant Stent Graft System conducted January–July 2007.
  5. Wakefield T, et al. J Vasc Surg. 1989;9:234–243.
  6. Verhagen, et al. The ENGAGE Registry: Ten-Year Outcomes with the Endurant Stent Graft for Endovascular Abdominal Aortic Aneurysm Repair. Presented at: Charing Cross 2023 International Symposium; April 26, 2023; London, UK.

  1. Rouwet EV, et al. Eur J Vasc Endovasc Surg. 2011;42:489–497
  2. Based on internal materials report 10011927DOC Rev.AE.