Professionisti del settore sanitario
BIOtherm
Heat Exchanger
Il tuo browser è obsoleto
Con un browser aggiornato, l'esperienza di navigazione sul sito Web di Medtronic sarà migliore. Aggiorna il mio browser adesso.
Si, sono un operatore sanitario
Note: Ai sensi e per gli effetti dell’Art. 76 D.P.R. 445/2000 consapevole della responsabilità e delle conseguenze civili e penali previste in caso di dichiarazioni mendaci e/o formazione od uso di atti falsi, nonché in caso di esibizione atti contenenti dati non più corrispondenti a verità e consapevole altresì che qualora emerga la non veridicità del contenuto della presente decadranno i benefici per i quali la stessa è rilasciata confermo di essere un OPERATORE SANITARIO.
I contenuti presenti in questo sito contengono informazioni rivolte agli operatori sanitari, in quanto si riferiscono a prodotti rientranti nella categoria dei dispositivi medici che richiedono l’impiego o l’intervento da parte di professionisti del settore medico-sanitario.
Professionisti del settore sanitario
Heat Exchanger
ECMOtherm® II Heat Exchanger
BIOtherm™ Heat Exchanger
Contraindication: This device used for any other purposes than for the indicated use is the responsibility of the user.
Indication: ECMOtherm-II™ Heat Exchanger are intended for use in the cardiopulmonary support procedures to cool and warm the blood. Typical applications include: total body perfusion, coronary perfusion, rapid infusion, and cardioplegia.
Warning: The use of certain solvents may compromise the integrity of the device.
Gas emboli must be cleared from the extracorporeal circuit before initiating bypass. Gas emboli are hazardous to the patient.
If leaks are observed during priming and/or operation, this may result in air embolism to the patient and /or fluid loss. The extracorporeal circuit must be continually monitored. Do not use the device if these conditions are observed
Blood inlet and outlet connections should be banded for added protection against high fluid pressures. Water inlet and outlet connections should be banded if Hansen type fittings are not used.
Do not exceed 65 psi water phase pressure.
Caution: Federal law (USA) restricts this device to sale by or on the order of a physician. For a complete listing of indications, contraindications, precautions and warnings, please refer to the Instructions For Use which accompany each product.
Contraindication: This device used for any other purposes than for the indicated use is the responsibility of the user.
Indication: BIOtherm™ Heat Exchangers are intended for use in the cardiopulmonary support procedures to cool and warm the blood. Typical applications include: total body perfusion, coronary perfusion, rapid infusion, and cardioplegia.
Warnings: The use of certain solvents may compromise the integrity of the device.
Gas emboli must be cleared from the extracorporeal circuit before initiating bypass. Gas emboli are hazardous to the patient.
If leaks are observed during priming and/or operation, this may result in air embolism to the patient and /or fluid loss. The extracorporeal circuit must be continually monitored. Do not use the device if these conditions are observed.
Blood inlet and outlet connections should be banded for added protection against high fluid pressures. Water inlet and outlet connections should be banded if Hansen type fittings are not used.
Do not exceed 45 psi water phase pressure.
Caution: Federal law (USA) restricts this device to sale by or on the order of a physician. For a complete listing of indications, contraindications, precautions and warnings, please refer to the Instructions For Use which accompany each product.
Medtronic Italia S.p.A. Società a socio unico soggetta ad attività di direzione e coordinamento da parte di Medtronic PLC.
Cap. soc. € 1.200.487,00 - Codice fiscale, partita IVA e numero di iscrizione al Registro delle Imprese di Milano-Monza-Brianza-Lodi 09238800156 – REA MI – 1275682. Sede Legale e Uffici Via Varesina, 162 Edificio Raimondi - 20156 Milano.