Professionisti del settore sanitario
Soft-Flow Arterial Cannulae
Cardiac Surgery
Vi informiamo che quanto contenuto nel nuovo sito prescelto non è di responsabilità di Medtronic Italia. Desiderate continuare?
Il tuo browser è obsoleto
Con un browser aggiornato, l'esperienza di navigazione sul sito Web di Medtronic sarà migliore. Aggiorna il mio browser adesso.
Si, sono un operatore sanitario
Note: Ai sensi e per gli effetti dell’Art. 76 D.P.R. 445/2000 consapevole della responsabilità e delle conseguenze civili e penali previste in caso di dichiarazioni mendaci e/o formazione od uso di atti falsi, nonché in caso di esibizione atti contenenti dati non più corrispondenti a verità e consapevole altresì che qualora emerga la non veridicità del contenuto della presente decadranno i benefici per i quali la stessa è rilasciata confermo di essere un OPERATORE SANITARIO.
I contenuti presenti in questo sito contengono informazioni rivolte agli operatori sanitari, in quanto si riferiscono a prodotti rientranti nella categoria dei dispositivi medici che richiedono l’impiego o l’intervento da parte di professionisti del settore medico-sanitario.
Professionisti del settore sanitario
Cardiac Surgery
Designed to be gentle on the aorta and easy to insert, Soft-Flow®* arterial cannulae help you proceed with confidence during cardiac surgery procedures.
As the first diffusion tip arterial cannulae on the market, the Soft-Flow was the cannula of choice for many cardiac surgeons. Working with MC3 Cardiopulmonary, we’ve made it possible to bring Soft-Flow arterial cannulae back to the market. Medtronic is the exclusive distributor and MC3 Cardiopulmonary is the manufacturer. Orders may be placed through your local Medtronic products representative.
Soft-Flow arterial cannulae are indicated for use in the perfusion of the ascending aorta during cardiopulmonary bypass (CPB) surgery. They are single use products, and are indicated for up to 6 hours of use.
Soft-Flow®* arterial angled-tip cannula showed a lower exit velocity than the Medtronic Select Series™ arterial angled open-tip cannula in an independent 3C-PIV bench test.**
Advanced flow visualization analysis demonstrates Soft-Flow arterial cannula provides a divided blood flow pattern which lessons the jetting effect observed with open-tip aortic cannulae.** The closed diffusion tip is designed to help reduce the risk of dislodging plaque from the aortic wall.1
**MC3, Inc. data on file. Testing was conducted in 3rd-party laboratory setting with aortic arch models and CPB circuit that utilized a Three-Component Particle Image Velocimetry (3C-PIV) technology to capture flow data. 3D velocity data is visualized in one 2D plane per image. The images capture the peak velocity for each cannula. Flow still occurs in unshaded vessel areas.
1Minakawa M, Fukuda I, Yamazaki J, Fukui K, Yanaoka H, Inamura T. Effect of cannula shape on aortic wall and flow turbulence: hydrodynamic study during extracorporeal circulation in mock thoracic aorta. Artif Organs. December 2007;31(12):880-886.
All Soft-Flow cannulae feature kink-resistant wire-wound bodies and a 3/8” vented or non-vented connector.
Choose:
The extended-length, kink-resistant, wire-wound body allows use across various patient anatomies. An orientation line, depth markings, and suture ring help you position the cannula.
Tip of Soft-Flow™ Extended Arterial Cannula
The closed tip of the Soft-Flow™ extended arterial cannula has an inner cone that directs flow through side vents. This results in a diffuse, lower velocity flow.
Soft-Flow™ Straight-Tip Arterial Cannula
The smooth, tapered, reverse-angle tip of the Soft-Flow™ straight-tip arterial cannula is designed to facilitate insertion and placement.
Soft-Flow™ Angled-Tip Arterial Cannula with Suture Bulb
The smooth, tapered, reverse-angle tip of the Soft-Flow™ angled tip arterial cannula is designed to facilitate insertion and placement.
Soft-Flow™ Angled-Tip Arterial Cannula with Suture Flange
The smooth, tapered, reverse-angle tip of the Soft-Flow™ angled-tip arterial cannula is designed to facilitate insertion and placement.
Soft-Flow®* cannula flow charts are provided for your comparison. Each flow curve represents in vitro laboratory data obtained using water at room temperature. The actual pressure drops encountered in a clinical situation may vary from those shown, depending on the blood viscosity and temperature.
Model
4949 |
Type
Suture ring, extended body |
Overall length
14.5 in (37.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
---|---|---|---|---|
Model
4951 |
Type
Suture ring, extended body |
Overall length
14.5 in (37.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
4948 |
Type
Suture ring, extended body |
Overall length
14.5 in (37.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
4950 |
Type
Suture ring, extended body |
Overall length
14.5 in (37.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
10 per carton
Model
5798 |
Type
Straight tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
---|---|---|---|---|
Model
5841 |
Type
Straight tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
5842 |
Type
Straight tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
5843 |
Type
Straight tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
10 per carton
Model
7072 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
18 Fr (6.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
---|---|---|---|---|
Model
5761 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
5762 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
7071 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
18 Fr (6.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
5767 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
5768 |
Type
Angled tip with suture bulb |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
7080 |
Type
Angled tip with suture flange |
Overall length
14.0 in (36.0 cm) |
French size
18 Fr (6.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
6394 |
Type
Angled tip with suture flange |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
6386 |
Type
Angled tip with suture flange |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Vented 3/8 in (0.95 cm) |
Model
6392 |
Type
Angled tip with suture flange |
Overall length
14.0 in (36.0 cm) |
French size
21 Fr (7.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
Model
6384 |
Type
Angled tip with suture flange |
Overall length
14.0 in (36.0 cm) |
French size
24 Fr (8.0 mm) |
Connector
Non-vented 3/8 in (0.95 cm) |
10 per carton
Care and caution should be taken to avoid damage to vessels and cardiac tissue during cannulation or other cardiac surgery procedures. For a listing of indications, contraindications, precautions, warnings, and potential adverse events, please refer to the Instructions for Use. Caution: Federal law (USA) restricts this device to sale by or on the order of a physician.
©2016, 2018 Medtronic. ®/TM*Third party brands are trademarks of their respective owners. All other brands are trademarks of a Medtronic company. Soft-Flow Arterial Cannulae are manufactured by MC3, Inc. and exclusively distributed by Medtronic.
Medtronic Italia S.p.A. Società a socio unico soggetta ad attività di direzione e coordinamento da parte di Medtronic PLC.
Cap. soc. € 1.200.487,00 - Codice fiscale, partita IVA e numero di iscrizione al Registro delle Imprese di Milano-Monza-Brianza-Lodi 09238800156 – REA MI – 1275682. Sede Legale e Uffici Via Varesina, 162 Edificio Raimondi - 20156 Milano.