PillCam™ Recorder 3

Product Details

The PillCam™ recorder 3 is a recording device worn by the patient during the capsule endoscopy procedure. Following the procedure, the physician downloads the images from the PillCam™ recorder 3 for interpretation.

  • Active steering of capsule frame rate
  • Real time viewing of the examination with color LED display
  • Audio and visual alerts to remind the patient of the next procedure steps
  • Integrated rechargeable battery
Order Information

Order Information
Order Code Description Unit of Measure Quantity
FGS-0347 PillCam™ Recorder 3 (recorder only) Each 1
FGS-0355 PillCam™ Recorder 3 Cradle Kit Each 1
FGS-0362 PillCam™ Recorder Accessories, DR3 Each 1

Physical Properties
Software Proprietary firmware
Recording Capacity Up to 15 hours @ LCD OFF
Weight 500 g, including battery pack
Operational Power 3V - 4.2V DC, 0.33A - 0.79A
Battery Type Internal, Li-Ion, 3.7 V typical, 8000mAH
Operating Temperature 0–40°C
Storage Temperature 0–55°C
Storage and Operating Humidity Up to 85%
Storage and Operating Pressure 790–520 mmHg

Receiver (Rx)
Operating Frequency 434.1 MHz

Transmitter
Operating Frequency 13.6 MHz
Frequency Band ISM
Modulation Type Linear Chirp
Type of Modulated Signal Digital data
Effective Radiated Power -27.4 dBm

PillCam™ SB 3 Sensor Belt

Product Details

Patients undergoing capsule endoscopy with the PillCam™ SB 3 system may wear the sensor belt to receive transmission data from PillCam™ SB 3 capsule.  The belt is worn around the patient’s waist over a single layer of clothing and can be adjusted to achieve the most comfortable fit.

  • Very comfortable
  • Easier and more convenient procedure for the medical staff
  • No need for shaving, skin preparation or adhesive pads reduces preparation and post procedure time
Order Information

Order Information
Order Code Description Unit of Measure Quantity
FGS-0590 PillCam™ Sensor Belt  Each 2
FGS-0510 PillCam™ Sensor Belt Disposable Kit Pack 5
FGS-0509 PillCam™ Sensor Belt Cover Each 1

PillCam™ Sensor Array

Product Details

The PillCam™ sensor array features an 8-lead sensor, which is placed on the patient’s body to receive transmission data from the capsule. It can be used as an alternative to the sensor belt. Also available for pediatric or smaller patients.

Order Information

Order Information
Order Code Description Unit of Measure Quantity
FGS-0591 PillCam™ Sensor Array Each 1
FGS-0609 PillCam™ Small Sensor Array Each 1
FGS-0453 PillCam™ Sensor Sleeves Pack 10
FGS-0581 6” Disposable Velcro Sleeve Pack 10

Reception Antenna
# of Sensor Elements 8 Sensors
Sensor Size Diameter: 40mm
Material Polyurethane, Teflon
Antennas Wire Material Coax wire

Transmission Antenna
Antenna Structure Loop antenna
Size 1.9 m
Color Black
Material Polyurethan, Teflon